Skip to main content
Delphix

Failed Refresh of ASE VDB Followed by a Successful Refresh Can Leave Truncate Log Feature Disabled (KBA6448)

 

KBA

KBA# 6448

 

Issue

When refreshing an ASE/Sybase type VDB, if the refresh operation should fail for a transient error and then another subsequent successful refresh is completed, it can leave the Truncate Log On Checkpoint feature disabled when it was enabled before refreshing.

 

Applicable Delphix Versions

Click here to view the versions of the Delphix engine to which this article applies
Major Release All Sub Releases
6.0 6.0.0.0, 6.0.1.0, 6.0.1.1, 6.0.2.0, 6.0.3.0, 6.0.3.1, 6.0.4.0

5.3

5.3.0.0, 5.3.0.1, 5.3.0.2, 5.3.0.3, 5.3.1.0, 5.3.1.1, 5.3.1.2, 5.3.2.0, 5.3.3.0, 5.3.3.1, 5.3.4.0, 5.3.5.0 5.3.6.0, 5.3.7.0, 5.3.7.1, 5.3.8.0, 5.3.8.1, 5.3.9.0

5.2

5.2.2.0, 5.2.2.1, 5.2.3.0, 5.2.4.0, 5.2.5.0, 5.2.5.1, 5.2.6.0, 5.2.6.1

5.1

5.1.0.0, 5.1.1.0, 5.1.2.0, 5.1.3.0, 5.1.4.0, 5.1.5.0, 5.1.5.1, 5.1.6.0, 5.1.7.0, 5.1.8.0, 5.1.8.1, 5.1.9.0, 5.1.10.0

5.0

5.0.1.0, 5.0.1.1, 5.0.2.0, 5.0.2.1, 5.0.2.2, 5.0.2.3, 5.0.3.0, 5.0.3.1, 5.0.4.0, 5.0.4.1 ,5.0.5.0, 5.0.5.1, 5.0.5.2, 5.0.5.3, 5.0.5.4

4.3

4.3.1.0, 4.3.2.0, 4.3.2.1, 4.3.3.0, 4.3.4.0, 4.3.4.1, 4.3.5.0

4.2

4.2.0.0, 4.2.0.3, 4.2.1.0, 4.2.1.1, 4.2.2.0, 4.2.2.1, 4.2.3.0, 4.2.4.0 , 4.2.5.0, 4.2.5.1

4.1

4.1.0.0, 4.1.2.0, 4.1.3.0, 4.1.3.1, 4.1.3.2, 4.1.4.0, 4.1.5.0, 4.1.6.0

Resolution

This feature can only be re-enabled on the target VDB Sybase database with the following command:

1> sp_dboption <database_name> , "trunc log on chkpt", true
2> go

Once the Delphix environment monitor runs against the VDB it will correct the setting in the GUI VDB/Configuration section.

 

Review the current setting by navigating to the Manage -> Datasets menu and selecting the VDB. Select the "Configuration" tab and check:

Snip20200923_4.png


 

 


Related Articles

The following articles may provide more information or related information to this article:

  • n/a