Skip to main content
Delphix

DB2 VDB Indexes Are All Invalid After Provision (KBA6856)

 

KBA

KBA# 6856

 

Issue

After a DB2 VDB provision or refresh, all indexes on the VDB show as invalid. The indexes show as valid on the parent dSource database.

Applicable Delphix Versions

Click here to view the versions of the Delphix engine to which this article applies
Major Release All Sub Releases
6.0 6.0.0.0, 6.0.1.0, 6.0.1.1, 6.0.2.0, 6.0.2.1, 6.0.3.0, 6.0.3.1, 6.0.4.0, 6.0.4.1, 6.0.4.2, 6.0.5.0

5.3

5.3.0.0, 5.3.0.1, 5.3.0.2, 5.3.0.3, 5.3.1.0, 5.3.1.1, 5.3.1.2, 5.3.2.0, 5.3.3.0, 5.3.3.1, 5.3.4.0, 5.3.5.0 5.3.6.0, 5.3.7.0, 5.3.7.1, 5.3.8.0, 5.3.8.1, 5.3.9.0

5.2

5.2.2.0, 5.2.2.1, 5.2.3.0, 5.2.4.0, 5.2.5.0, 5.2.5.1, 5.2.6.0, 5.2.6.1

5.1

5.1.0.0, 5.1.1.0, 5.1.2.0, 5.1.3.0, 5.1.4.0, 5.1.5.0, 5.1.5.1, 5.1.6.0, 5.1.7.0, 5.1.8.0, 5.1.8.1, 5.1.9.0, 5.1.10.0

5.0

5.0.1.0, 5.0.1.1, 5.0.2.0, 5.0.2.1, 5.0.2.2, 5.0.2.3, 5.0.3.0, 5.0.3.1, 5.0.4.0, 5.0.4.1 ,5.0.5.0, 5.0.5.1, 5.0.5.2, 5.0.5.3, 5.0.5.4

4.3

4.3.1.0, 4.3.2.0, 4.3.2.1, 4.3.3.0, 4.3.4.0, 4.3.4.1, 4.3.5.0

4.2

4.2.0.0, 4.2.0.3, 4.2.1.0, 4.2.1.1, 4.2.2.0, 4.2.2.1, 4.2.3.0, 4.2.4.0 , 4.2.5.0, 4.2.5.1

4.1

4.1.0.0, 4.1.2.0, 4.1.3.0, 4.1.3.1, 4.1.3.2, 4.1.4.0, 4.1.5.0, 4.1.6.0

Resolution

When you set the LOGINDEXBUILD configuration parameter to OFF, index objects are marked invalid while rolling forward through index creation, recreation, or reorganization operations. You must re-create indexes after the rolling forward operation completes and the database is restarted. Index re-creation depends on the value of the indexrec configuration parameter and if you issue an explicit RESTART DATABASE command.

When you set the LOGINDEXBUILD configuration parameter to ON, each index page is logged during index creation, recreation and reorganization. Index objects are not marked invalid, and you do not have to re-create indexes after the rolling forward operation completes.

To stop the flow of invalid indexes from a dSource to VDB, you will need to set LOGINDEXBUILD to ON for dSource and VDB as well (If already provisioned). This is mentioned in the Linking a Db2 dSource documentation. 

 

 

 

Related Articles

The following articles may provide more information or related information to this article: