Skip to main content
Delphix

Adding Tables to a Rule Set and Usage of the Tables Search Filter

Applicable Delphix Versions

  • 5.1
  • 5.0
  • 4.3
  • 4.2
  • 4.1
  • 4.0
  • 3.2

Issue

The problem can occur when adding more tables to an existing Rule Set. When you add tables to an existing rule set and you use the table search/ filter to narrow down the list of candidate tables, this may result in previously selected  tables being deleted from the saved selections list.

Troubleshooting

The steps leading to the issue:

In this example, the table MD_DEPT was already  part of the Rule Set. The requirement is to add table SIREN_TAB  the rule set also.

 

 

 

1) Navigate to the 'Edit Rule Set' screen

Home -> Environments -> select Environment  -> Rule Set -> select the rule set and  click on 'Edit Rule Set'

 

2) As there are many tables in the candidate tables list, we use the Search feature to filter the list. 

'SIREN' is entered into the Search field and hit return key. This narrows down the list to return SIREN_TAB and SIREN_TAB2

Select the table SIREN_TAB and click on the 'Save' button

 

 

Result: SIREN_TAB has replaced MD_DEPT in the Table list. MD_DEPT is no longer in the Table list for the Rule Set

Resolution

A slight change in the Rule Set table selection steps is required, as follows:

After selecting the table to be added and before clicking on the 'Save' button,  click on the Clear button so that the Search field is blank

then click on 'Save'. The result is that both tables appear in the Rule Set table list.

 

 

  • Was this article helpful?